Eliminate Downtime:
The Ultimate AGM Upgrade
for Industrial Barrel Lifters.
Replace standard 80Ah flooded batteries with 120Ah of military-grade, maintenance-free power. Engineered for severe vibration resistance and extended shift runtimes in Morse and similar heavy-duty lifts.
- Capacity
- 120Ah
- Group
- 31
- Chemistry
- AGM
Problem
The Flooded Battery Liability
Legacy flooded cells weren't built for the duty cycle your lifters see. The failure pattern is predictable — and expensive.
Acid leaks
Sulfuric electrolyte corrodes lift chassis, terminals, and wiring harnesses.
Daily PM burden
Water-level checks and equalization pull techs off the floor every shift.
Vibration failure
Lead plates fracture under continuous lift cycle vibration.
Undersized capacity
80–100Ah cells die mid-shift, stranding loads and operators.
Solution
VMAX Heavy-Duty AGM Technology
VRLA construction, military-grade plate alloys, and absorbed glass mat separators — engineered for the abuse.
99.9% maintenance-free
Sealed VRLA. No watering, no equalization, no acid spills.
Military-grade alloys
Custom-cast plates resist shedding under deep-cycle abuse.
Shock & vibration rated
AGM mat immobilizes electrolyte — survives constant lift motion.
120AH DEEP CYCLE CAPACITY
120Ah in the same Group 31 footprint as your 80Ah factory cell.
The Standard, Upgraded
VMAX MR137-120
A true deep-cycle Group 31 drop-in replacement that delivers a massive 120Ah capacity — outperforming standard 80Ah market alternatives by up to 50%.
- Capacity (C/20)
- 120 Ah
- Nominal Voltage
- 12 V
- Form Factor
- BCI Group 31
- Plate Spec
- Military-grade custom
- Maintenance
- Sealed / VRLA
- Use Case
- Industrial deep cycle
Double Your Operating Capacity:
Dual-Battery Lift Configurations
Many lift manufacturers, including Morse, support a factory-installed secondary battery. You can instantly double your runtime by adding a secondary battery box and running two MR137-120 units in parallel.
Net result
240Ah of usable AGM capacity — one full extra shift, zero PM.
VBB-31 Adjustable Battery Box
Securely mount your secondary Group 31 battery to the lift chassis. Adjustable for Group 24–31 footprints.
View Battery Box →
BC8S1215A 8-Stage Smart Charger
Required for optimal cycle life. Charges single or dual banks simultaneously with microprocessor-controlled precision.
View Smart Charger →The Numbers,
Side By Side.
Standard factory flooded cells vs. the VMAX MR137-120 AGM upgrade. Same footprint. Different class of equipment.
| Metric | Standard Flooded 80Ah | VMAX MR137-120 |
|---|---|---|
| Nominal Capacity | 80 Ah | 120 Ah |
| Chemistry | Flooded Lead-Acid | AGM (VRLA) |
| Maintenance | Weekly watering | None |
| Vibration Resistance | Low | High (immobilized electrolyte) |
| Typical Cycle Life @ 50% DoD | ~400 cycles | ~900–1,000 cycles |
| Acid Leak Risk | High | Sealed — none |
Verified field reviews
These batteries turned my heavy equipment into a hot rod. Reliable power all shift long.
I used these to replace the factory batteries in our electric lifts. High quality, exact fit, and the capacity difference is immediately noticeable.
We run our equipment hard all day. The VMAX deep cycle provides more than enough juice for continuous running, and zero maintenance.
Engineered to Outlast.
Guaranteed to Perform.
Your operations rely on continuous power. We engineer our VRLA batteries with uncompromising standards to ensure they work as hard as you do. Supported by a 12-month hassle-free warranty and backed by our dedicated technical support team based in the USA.